Loading Bay Adviser

    Welcome to the Loading Bay Adviser by MHE-Demag.

    The Loading Bay Adviser offers recommendations for door and docking equipment that are required at the interface between vehicle and building.

    The following questions will guide you to the best suited products to equip your loading bay.







    Elevating dock levellers can be built in virtually any size and capacity required for the application.
    They provide the ability to service trucks at any height and can also offer fork trucks access to ground level.


    • Available in 30,000lbs (13.6t) or 50,000lbs (22.0t) capacity ratings as standard
    • Heavy-duty version up to 80,000lbs (36t) capacity available for the most demanding loading conditions
    • Heavy-duty I-beam under-deck support ensures high structural strength against rolling loads
    • Heavy-duty hydraulic system with high-quality power pack and cylinders from reputable manufacturers
    • Maintained tilt design compensates for uneven loading conditions
    • Standard working range +/- 12″ (+/- 300 mm) up/down, customisable if necessary to suit higher trucks or low loading docks
    • Fail-safe safety design
    • Weatherproof IP 55 control box
    • Standard working range toe guards supplied
    • Comes with one set of moulded rubber dock bumpers as standard

    Vertical Storing Dock Leveller is the perfect loading dock solution for facilities
    and applications that require strict climate control or high cleanliness levels.
    It improves internal temperature control, reduces the risk of door damage and minimises debris entry.




    TR IN

    For moderate-to-high traffic indoor or outdoor environments.
    • 1,500,000 operating cycles
    • 6,000 x 5,800 mm max size
    • Galvanised steel door structure & drive shaft

    TECHNICAL SPECIFICATION TR IN
    WIDTH (mm) 2,000–6,000
    HEIGHT (mm) 1,800–5,800
    OPENING SPEED (m/s) 2.0 - size up to 3,000 x 3,000 mm
    1.5 - size up to 5,000 x 5,000 mm
    1.0 - size up to 5,800 x 6,000 mm
    CLOSING SPEED (m/s) 0.8 or as opening speed
    FABRIC TYPE PVC coated polyester
    FABRIC WEIGHT (g/m2) 900
    PANEL TYPE
    (OPTIONAL)
    Vision, 1 mm thick transparent PVC
    TRACK GUIDES Extruded polyethylene
    WIND LOAD EN12424:2000
    • Class 3 (3,000 x 3,000 mm)
    • Class 2 (5,000 x 5,000 mm)
    • Class 1 (5,800 x 6,000 mm)
    OPERATING TEMPERATURE RANGE (°C) • -15 to +70, indoor drive
    • -5 to +70, outdoor drive
    • -35 to +70, drive & side frame heating systems
    CONTROL UNIT • Painted steel housing, 470 x 290 x 200 mm
    • IP54 ingress protection; frequency converter
    OPERATOR Supply 240V/50–60Hz; 400V/50–60Hz; 1.5kW motor power
    • IP54 ingress protection
    • Limit positions by encoder
    SAFETY • Built to EU standards - EN 13241 CN
    • Photocells (1 pair), 500 mm from floor level
    • Door bottom safety sensor
    • Power failure triggers auto-open to 2,000 mm
    height for counterweighted doors (optional)
    • Transparent window (not available for cold storage)
    • Flashing light
    • Siren (optional)

    Help us to specify the project for you, by submitting the form below

    Protection with aesthetic values.
    Heavy-duty rolling shutter doors for normal temperature warehouses, providing a high level of security and protection.

    TECHNICAL SPECIFICATION Roller Shutter Door
    WIDTH (mm) 2,000–12,000
    HEIGHT (mm) 1,800–12,000
    SLAT THICKNESS (mm) 0.6, 0.8, 1.0, 1.2 and 1.5
    SLATS Roll-formed first grade high-quality phosphated galvanised steel
    COATING Powder coated
    OPERATION Push button control

    40 mm/80 mm
    TP 40/TP 80

    For excellent insulation against the elements and temperature loss.
    • 25,000 operating cycles
    • Durable powder-coated springs

    TECHNICAL SPECIFICATION TP40 TP80
    MODEL TP 40 TP 80
    PANEL THICKNESS (mm) 40 80
    HEATING ELEMENT N/A N/A Along side tracks
    WIDTH (mm) 2,000–8,000 2,000–6,000 2,000–8,000
    HEIGHT (mm) 2,000–8,000 2,000–5,000 2,000–5,000
    THERMAL INSULATION (R-VALUE) (m2. c/w) 1.13 2.3 3.3
    WIND LOAD Class 2 (EN12424:2000)
    AIRTIGHTNESS Class 4 (EN12426:2000)
    WATERTIGHTNESS Class 3 (EN12425:2000)
    ACUSTIC INSULATION <35 dB
    DOOR PANEL WEIGHT (kg/m2) 10.9 16.3 16.3
    THICKNESS OF STEEL CASING (mm) 0.35

    TR EX

    For moderate-to-high traffic indoor or outdoor environments.
    • 1,500,000 operating cycles
    • 6,000 x 5,800 mm max size
    • Galvanised steel door structure & drive shaft

    TECHNICAL SPECIFICATION TR EX
    WIDTH (mm) 2,000–6,000
    HEIGHT (mm) 1,800–5,800
    OPENING SPEED (m/s) 2.0 - size up to 3,000 x 3,000 mm
    1.5 - size up to 5,000 x 5,000 mm
    1.0 - size up to 5,800 x 6,000 mm
    CLOSING SPEED (m/s) 0.8 or as opening speed
    FABRIC TYPE PVC coated polyester
    FABRIC WEIGHT (g/m2) 900
    PANEL TYPE
    (OPTIONAL)
    Vision, 1 mm thick transparent PVC
    TRACK GUIDES Extruded polyethylene
    WIND LOAD EN12424:2000
    • Class 3 (3,000 x 3,000 mm)
    • Class 2 (5,000 x 5,000 mm)
    • Class 1 (5,800 x 6,000 mm)
    OPERATING TEMPERATURE RANGE (°C) • -15 to +70, indoor drive
    • -5 to +70, outdoor drive
    • -35 to +70, drive & side frame heating systems
    CONTROL UNIT • Painted steel housing, 470 x 290 x 200 mm
    • IP54 ingress protection; frequency converter
    OPERATOR Supply 240V/50–60Hz; 400V/50–60Hz;
    1.5kW motor power
    • IP54 ingress protection
    • Limit positions by encoder
    SAFETY • Built to EU standards - EN 13241 CN
    • Photocells (1 pair), 500 mm from floor level
    • Door bottom safety sensor
    • Power failure triggers auto-open to 2,000 mm
    height for counterweighted doors (optional)
    • Transparent window (not available for cold storage)
    • Flashing light
    • Siren (optional)

    Food Industry TR FO

    For food processing industries.
    • 1,500,000 operating cycles
    • 4,000 x 4,000 mm max size
    • Stainless steel AISI 304 door structure & drive shaft
    • Washable door & track

    TECHNICAL SPECIFICATION TR FO
    WIDTH (mm) 2,000–4,000
    HEIGHT (mm) 1,800–4,000
    OPENING SPEED (m/s) 1.9
    CLOSING SPEED (m/s) 0.8 or as opening speed
    FABRIC TYPE PVC coated polyester
    FABRIC WEIGHT (g/m2) 900
    PANEL TYPE
    (OPTIONAL)
    Vision, 1 mm thick transparent PVC
    TRACK GUIDES Extruded polyethylene
    WIND LOAD EN12424:2000
    • Class 3 (3,000 x 3,000 mm)
    • Class 2 (4,000 x 4,000 mm)
    OPERATING TEMPERATURE RANGE (°C) • -15 to +70, indoor drive
    • -5 to +70, outdoor drive
    • -35 to +70, drive & side frame heating systems
    • Below -5, no windows
    CONTROL UNIT • Painted steel housing, 470 x 290 x 200 mm
    • IP54 ingress protection; frequency converter
    OPERATOR Supply 240V/50–60Hz; 400V/50–60Hz; 1.5kW motor power
    • IP54 ingress protection
    • Limit positions by encoder
    SAFETY • Built to EU standards - EN 13241 CN
    • Photocells (1 pair), 500 mm from floor level
    • Door bottom safety sensor
    • Power failure triggers auto-open to 2,000 mm height for counterweighted doors (optional)
    • Transparent window (not available for cold storage)
    • Flashing light
    • Siren (optional)

    Cold Storage TR FR

    Perfect for freezing conditions.
    • 1,500,000 operating cycles
    • 3,500 x 4,000 mm max size
    • Galvanised steel door & drive shaft

    TECHNICAL SPECIFICATION TR FR
    WIDTH (mm) 2,000–3,500
    HEIGHT (mm) 1,800–4,000
    OPENING SPEED (m/s) 1.5
    CLOSING SPEED (m/s) 0.8 or as opening speed
    FABRIC TYPE PVC coated polyester
    FABRIC WEIGHT (g/m2) 900
    PANEL TYPE
    (OPTIONAL)
    Vision, 1 mm thick transparent PVC
    WIND LOAD EN12424:2000
    • Class 1 (3,500 x 4,000 mm)
    OPERATING TEMPERATURE RANGE (°C) • -15 to +70, indoor drive
    • -5 to +70, outdoor drive
    • -35 to +70, drive & side frame heating systems
    • Below -5, no windows
    CONTROL UNIT • Painted steel housing, 470 x 290 x 200 mm
    • IP54 ingress protection; frequency converter
    OPERATOR Supply 240V/50–60Hz; 400V/50–60Hz; 1.5kW motor power
    • IP54 ingress protection
    • Limit positions by encoder
    SAFETY • Built to EU standards - EN 13241 CN
    • Photocells (1 pair), 500 mm from floor level
    • Door bottom safety sensor
    • Flashing light
    • Siren (optional)

    Large Doors
    TR LA

    For large openings or high wind loads.
    • 1,000,000 operating cycles
    • 12,000 x 7,000 mm max size
    • Galvanised steel tracks, covers & tubes

    TECHNICAL SPECIFICATION TR LA
    WIDTH (mm) 2,000–12,000
    HEIGHT (mm) 2,000–7,000
    OPENING SPEED (m/s) 1.0 - size up to 5,000 x 5,000 mm
    0.6 - size up to 12,000 x 7,000 mm
    CLOSING SPEED (m/s) 0.5
    FABRIC TYPE PVC coated polyester
    FABRIC WEIGHT (g/m2) 900
    PANEL TYPE
    (OPTIONAL)
    Vision, 1 mm thick transparent PVC
    OPEN/CLOSE MECHANISIM Belt system
    WIND LOAD EN12424:2000
    • Class 4 (up to 3,000 mm width)
    • Class 3 (up to 5,000 mm width)
    • Class 2 (up to 8,000 mm width)
    • Class 1 (up to 12,000 mm width)
    OPERATING TEMPERATURE RANGE (°C) • -15 to +70, indoor drive
    • -5 to +70, outdoor drive
    • -35 to +70, drive & side frame heating systems
    • Below -5, no windows
    CONTROL UNIT/OPERATOR • Supply 240V/50–60Hz; 400V/50–60Hz; 0.75–2.2kW motor power
    • IP54 ingress protection
    • Limit positions by encoder
    SAFETY • Built to EU standards - EN 13241 CN
    • Photocells (1 pair), 500 mm from floor level
    • Door bottom safety sensor
    • Power failure triggers auto-open to 2,000 mm height for counterweighted doors (optional)
    • Transparent window (not available for cold storage)
    • Flashing light
    • Siren (optional)

    TR SP

    For better security including residential usage.
    • 3,000,000 operating cycles
    • 6,000 x 6,000 mm max size
    • High wind load tolerance than standard high speed doors at certain sizes

    TECHNICAL SPECIFICATION TR SP
    WIDTH (mm) 2,000–6,000
    HEIGHT (mm) 1,800–6,000
    OPENING SPEED (m/s) 1.5
    CLOSING SPEED (m/s) 0.8 or as opening speed
    DOOR STRUCTURE Galvanised steel
    PANEL TYPE Aluminium sandwich panels
    SANDWICH PANEL THICKNESS (mm) 40
    TRACK GUIDES Aluminium
    WIND LOAD EN12424:2000
    • Class 3 (3,000 x 3,000 mm)
    • Class 2 (6,000 x 6,000 mm)
    OPERATING TEMPERATURE RANGE (°C) • -15 to +70, indoor drive
    • -5 to +70, outdoor drive
    • -35 to +70, drive & side frame heating systems
    • Below -5, no windows
    CONTROL UNIT • For servo motor
    • Painted steel housing, 370 x 250 x 135 mm
    • IP54 ingress protection
    OPERATOR • Supply 240V/50–60Hz; 400V/50–60Hz; 0.75–1.5kW servo motor
    • IP54 ingress protection
    SAFETY • Built to EU standards - EN 13241 CN
    • Photocells (2 pairs), 400 mm & 900 mm from floor level
    • Door bottom safety sensor
    • Winter auto-run function
    • Partial opening function
    • Flashing light
    • Siren (optional)

    Full Vision TP VI

    For good insulation, allowing full light and vision through the door.
    • 25,000 operating cycles
    • Internal & external visibility
    • Good light permeability, energy saving

    TECHNICAL SPECIFICATION TP VI
    WIDTH (mm) 2,000–6,000
    HEIGHT (mm) 2,000–6,000
    THERMAL INSULATION (R-VALUE) (m2. c/w) 0.20
    WIND LOAD Class 2 (EN12424:2000)
    WATERTIGHTNESS Class 3 (EN12425:2000)
    WEIGHT OF DOOR LEAF (kg/m2) 17
    TYPE OF VISION PANEL 40
    TRACK GUIDES Double acrylic glass
    ACRYLIC GLASS THICKNESS (mm) 3
    WEIGHT OF VISION PANEL (kg/m3) 3.28
    LIGHT TRANSMISSION TD65 80 %

    Based on your selection, we recommend to add a loading bay shelter


    Retractable

    TS RE

    For air-conditioned and ambient temperature environments.
    • Double-reinforced PVC front cover
    • 0.5 mm thick PVC sheet side covers
    • Aluminium frame structure

    TECHNICAL SPECIFICATION TS RE
    WIDTH (mm) 3,000/3,200/3,400
    HEIGHT (mm) 3,000/3,200/3,400/3,800/4,400
    DEPTH 600
    UPPER FLAP LENGTH (mm) 1,000
    SIDE FLAP LENGTH (mm) 600
    FRONT PVC SHEET THICKNESS (mm) 3
    SIDE PVC SHEET THICKNESS (mm) 0.5
    OPEN/CLOSE MECHANISIM Belt system
    OPERATING TEMPERATURE RANGE (°C) -35 to +50

    Inflatable

    TS IN

    Inflatable seal made for cold storage facilities where impeccable sealing is required.
    • Military-grade Cordura® 1000D inflatable cushions
    • 3-phase 380V 350W blower motor (1-phase 220V option available)
    • Sandwich panel frame

    TECHNICAL SPECIFICATION TS IN
    WIDTH (mm) 3,410/3,610
    HEIGHT (mm) 3,300/3,800/4,900
    DEPTH 800
    UPPER CUSHION (mm) 900
    SIDE CUSHION (mm) 600
    CORDURA® 1000D CUSHION MATERIAL THICKNESS (mm) 0.5
    AVERAGE CUSHION INFLATION TIME (sec) 40
    OPERATING TEMPERATURE RANGE (°C) -35 to +50

    Compression

    TS CO

    For air-conditioned environments.